公司简介 详细 >

 Hydrobull——欧洲最大的车间起重机项目

  Hydrobull公司成立于1934年,其车间起重机在全欧洲拥有最大的市场。经过七十多年的发展,Hydrobull在研发优质、安全的普通型与特种起重机上混合了传统技术与新的未来技术。沿循2500年历史的古埃及传统起重机,Hydrobull研发出数百种普通型与特种起重机,有20.000多台运往德国及整个欧洲。有其主要系列为工业用起重机,其非常强劲,有25种型号的容量达到150公斤到4500公斤。
  起重机的历史始于非常便宜的亚洲生产起重机项目(类型1个角),接着为欧洲生产的轻型项目,到Hydrobull自己的生产(2个角),再到轻型平衡重起重机项目,Hydrobull自己生产的(3个角,加上电动(4个角))。Hydrobull的主要系列为工业用起重机项目,其非常强劲,有25种型号的正常操作容量达到150公斤到4500公斤,为4个角。如果这些起重机仍不能满足用户的需求,Hydrobull的工程师将按您的期望来设计解决(可查看特种起重机5个角)。
  所有产品通过CE认证,并且所有工业用起重机的制造是在一拥有特别资质证书的专门焊接厂区开展,,遵守操作健康与安全规范BGVD6。每台起重机离厂前都经过严格的检验,检验结果由专家在随机的卡片上记录。特制的起重机将由行业协会授权的专家进行特殊的检验,其检验将记入随机的册子里面,这对于每年的维护控制是有用的。
另外,我们有选择性地供应手动操作起重机,
 电动升降与驱动,
 绞车升降
 可调节的离子束,液压举升,绞车降低
 更多的关于服务,配件,技术建议,与工程专家信息,请联系Hydrobull团队。

  我们的产品系列除了起重机外,还有液压堆垛(手动,电动),托盘车,升降设备,油桶倾倒单元等。
  过去几十年投入运作的20.000多台车间起重机将作为顾客选择Hydrobull品牌的安全性参考。


Hydrobull - vastest program of workshop cranes in Europe -
Hydrobull was founded in 1934
*******Welcome to the largest market place of workshop cranes in whole Europe********** 
 
Since 7 decades our firm combines tradition and new future development for normal asnd special cranes with quality and safety. Following the 2500 years old Egyptian tradition of cranes, HYDROBULL developped hundreds of normal and special cranes and delivered more than 20.000 pieces in Germany and whole Europe. Therefore please go on looking to our web sites:
Beginning with the very cheap program of cranes asiatic production ( category 1 horn ), following the light propram of European production and Hydrobull own production ( 2 horn, )
Then the program of light counterweight cranes, own Hydrobull production ( 3 horn  additionally with electric function ( 4 horn) ). The main range of Hydrobull is the industrial program of cranes, very robust with more than 25 types in normal execution capacity 150 kg to 4500 kg, 4 horn. Even if one of these cranes does not comply with the customers requirements Hydrobull engineers will help to solve the problem with the " crane of your desire" ( see special cranes five horn) .
*** All products are CE proved ***
All industral cranes are manufactured in a welding specialist factory with special qualification certificate, and comply with the factories act with the health and safety at work BGVD6
Each crane leaving our works is strictly examined. This examination is documented by a special expert on a crane-card

Special manufactured cranes will get a sepcial examination by an expert proved by the working association. This testation is given in a crane book, which is important for documention of the yearly controls.
Additionally and optional we can offr to the hand operated cranes ( beginning with category  ,

battery electric lifting and driving
lifting by winch
adjustable hib, hydraulically
lifting and lowering by winch
For further information about SERVICE; SPARE PARTS; TECHNICAL ADVICE; ENGINEER WORK SPECIALIST - please contact the HYDROBULL TEAM.
Our complete range of procusts in addition to cranes :
Hydraulic stackers manual, or electric
Pallets
lifting equipments
drum tilting units
Presses.

More than 20.000 workshop cranes delivered in the last decades will give the security to the customer that he will buy a branded article.

Your HYDROBULL-TEAM

公司新闻 更多 >