SAE 430B C86300锰青铜性能及成分
标准: ASTM B-62,ASTM B-271,ASTM B-505,ASTM B-584,ASTM B-145/4A,SAE 461,SAE J462,SAE 40,AMS 4085, AMS 4855B,DIN 2.1096.01
C86300连续铸造锰青铜是一种高强度,不可热处理的铜合金,用于需要优异的磨损特性和高轴承强度的重载和低速的应用。典型应用包括低速重载轴承,齿轮,凸轮和液压缸零件。符合连续铸造规范ASTM b505。
C86300锰青铜的典型用途-CDA 863 - SAE 430 B:建筑商硬件:支架
电气:电气元件,开关
紧固件:拧紧螺母,拧紧螺母
工业:木浆工业成型模具磨损环,大型阀杆,液压缸零件,螺旋桨,桥销,木浆工业成型模具,凸轮,Gib,齿轮,液压缸零件,低速、重载轴承、衬套、高强度机器零件、吊钩、框架、支柱
海军陆战队:船用五金,舵,船用五金盖,夹具,船零件,
嘉兴固润是生产制造C86300锰青铜铸件及机加工部件的主要厂家。
Alloy SAE 430 B,也称为C86300锰青铜,其化学成分如下:
铜 (Cu):60.0% - 66.0%
铝 (Al):5.0% - 7.5%
铁 (Fe):2.0% - 4.0%
铅 (Pb):最大0.2%
锰 (Mn):2.5% - 5.0%
镍 (Ni):最大0.5%
锡 (Sn):最大0.2%
锌 (Zn):22.0% - 28.0%
Standards: ASTM B-62, ASTM B-271, ASTM B-505, ASTM B-584, ASTM B-145/4A, SAE 461, SAE J462, SAE 40, AMS 4085, AMS 4855B, DIN 2.1096.01
C86300 continuous cast manganese bronze is a high strength, non-heat treatable copper alloy intended for use in applications requiring a good combination of outstanding wear characteristics and high bearing strength for heavy loads and slow speeds. Typical applications include slow speed heavy duty load bearings, gears, cams and hydraulic cylinder parts. Conforms to continuous cast specification ASTM B505.
Typical Uses for C86300 Manganese Bronze - CDA 863 - SAE 430 B:BUILDERS HARDWARE: Brackets
ELECTRICAL: Electrical Components, Switches
FASTENERS: Screw Down Nuts, Screw Down Nuts
INDUSTRIAL: Wear Rings for Forming Dies for Wood Pulp Industry, Large Valve Stems, Hydraulic Cylinder Parts, Propellers, Bridge Pins, Forming Dies for Wood Pulp Industry, Cams, Gib, Gears, Hydraulic Cylinder Parts, Slow Speed, Heavy Load Bearings, Bushings, High Strength Machine Parts, Hooks, Frames, Struts
MARINE: Marine Hardware, Rudders, Covers for Marine Hardware, Clamps, Boat Parts
Jiaxing IGRN Solid Lubricating Bearing CoLTD is the main manufacturer of C86300 manganese bronze castings and machined parts.