美国哥黑尔(GEHL)木材抱夹叉车 3935
品牌：美国哥黑尔叉车(GEHL)
产品详情
产品参数
产品图片
With the model 3935 you get excellent fuel efficiency, lower noise levels than previous models and a lift capacity up to 1,360 lbs. A naturally-aspirated, high-torque engine puts out 36 hp with top speeds up to 7 mph.
A narrow frame provides unmatched maneuverability, allowing the 3935 to operate in the most crowded spaces!
|
GENERAL*
Overall Operation Height – fully raised (mm)
Height to hinge pin – fully raised (mm)
Overall height with operator guard (mm)
Ground clearance to chassis – between wheels (mm)
Overall length (mm)
Overall length – less bucket (mm)
Wheel base (mm)
Dump reach – Full height (mm)
Rollback at ground
Dump angle – Full height
Overall width – Less bucket
(Tire in/Tires out position) (mm)
Bucket width (mm)
Clearance circle – rear (mm)
Clearance circle – front less bucket (mm)
Clearance circle – front with bucket (mm)
Seat to ground height (mm)
Rollback at full height
Dump height (mm)
Departure angle
Tires
ENGINE
Make
Model
Net power @ rpm (kW)
Displacement (L)
HYDRAULIC SYSTEM
T-bar Hand controls, Hand/Foot controls,
or Dual-Hand controls
Auxiliary hydraulics (L/min)
Filtration
Reservoir capacity (L)
ELECTRICAL SYSTEM
Battery
Starter
Alternator
CAPACITIES/WEIGHTS
SAE Rated operating load (kg)
SAE Rated operating load w/optional weight kit (kg)
Fuel tank (L)
Travel speed (km/h)
Operating weight (kg)**
* All measurements w/std. flotation tires & std. dirt bucket
** Base units w/std. equipment, tires, bucket & 175 lb. (79 kg) operator
|
141.8” (3600)
110.0” (2797)
72.3” (1835)
8” (203)
117.9” (2995) w/60” bucket
90” (2285)
36.3” (922)
25” (635)
28°
36°
52”/58” (1318/1475)
61” (1549)
53.8” (1367)
43.2” (1097)
71.1” (1806)
35” (889)
100°
86.5” (2197)
26°
10.00x16.5
Yanmar
3TNV88
36 hp (27) @ 3000
100 cu.in. (1.64)
Traction/Lift/Tilt
14.4 gpm (55)
7 micron
8 gal. (30.3)
12-Volt (675 CCA)
12-Volt
40-amp
1260 lbs. (57)
1360 lbs. (617)
8.5 gal. (32.2)
0-7 mph (0-11)
4600 lbs. (2087)
|
