The solid welding construction and high load capacity make the JHB5 an outstanding piece of equipment. The lifting movements are initiated by hydraulic pressure at the steering axle and push rods on the fork rollers. Standard version with steel steering and fork rollers. The steering rollers can also be made of PA, if required.

Typ	JHB 5
Max. load as surface load	kg/lbs	5 000/11000
Fork length A	mm/in	1150/45.2"
Fork width B	mm/in	580/22.8"
Fork spacing centre/centre C	mm/in	370/14.6"
Prong width D	mm/in	210/8.3"
Installation height E	mm/in	90/3.5"
Max. lifting height. H	mm/in	110/4"
Ø of fork rollers - steering rollers	mm/in	80/200 - 3.1/7.8"
Min. ground clearance F	mm/in	20/0.8"
Order No.	13 050 200-S