SCZ50-2D伸缩臂吊装机 SCZ50-2D
品牌：厦门嘉丰(JF)
产品详情
产品参数
产品图片
SCZ50-2D伸缩臂吊装机
（Telescopic Crane Loader）
[ 产品简介 Product Introduction ]
SCZ50-2D型伸缩臂吊装机，底盘采用前轮驱动，后轮转向，刚性悬挂；传动采用前后各两档液力机械传动变速箱，全液压动力转向，制动为气推油钳盘式制动；工作装置为两节四边形伸缩臂和一个可旋转吊臂组成。该机专用于进集装箱石板材的吊装作业，也可作为一般吊车使用，可广泛适用于工厂、码头、货场、林场、建材、仓库、物流等行业，是一种适应性广和效率高的装卸机械。
The SCZ50-2D Telescopic Crane Loader works with front-wheel drive, rear-wheel steering, rigid suspension; adopt total four hydromechanical drive gear-boxes in the back and front as the transmission, hydraulic power steering, caliper disc brake; the working device is composed of two quadrilateral portable telescopic arms and a rotary boom. It is specially used for lift on/off the stone slab container and it can also be used as a normal crane. It is widely available for the factory, dock, goods yard, forestry center, building materials industry, warehouse, logistics and so on. It is a handling machinery of wide application and high efficiency.
[ 主要技术参数 Specifications ]
|
额定起重量 Rated Load |
5000kg | |
|
载荷中心距（轮胎前沿距载荷中心） The Distance of Load Center(Tyre-fore to load center) |
3000mm | |
|
主钩最大起升高度（主吊钩距地面） Max.Lifting Height of Main Hook(Main hook to ground) |
6250mm | |
|
主钩最大外伸距（水平）（轮胎前沿距主吊钩） Max.Outspread of Main Hook(Horizontal)(Tyre-fore to main hook) |
2750mm | |
|
最大行驶速度 Max.Traveling Speed |
25km/h | |
|
最小离地间隙 Min.Ground Clearance |
365mm | |
|
最小转弯半径 Min.turning Radius |
6800mm | |
|
爬坡度 Grade Ability |
≥20% | |
|
倾翻角度上/下 The Angle of Lean Up/Down |
24°/22.5° | |
|
轮距 Tread |
1825mm | |
|
轴距 Wheel base |
2998mm | |
|
自重 Deadweight |
13000kg | |
|
整机外形尺寸（长×宽×高） Overall Dimension (L×W×H) |
5400mm×2200mm×2800mm | |
|
发动机（一拖东方红） Engine (Yituo Dongfanghong) |
型号 Type |
LR4108G76 |
|
额定功率 Rated power |
74kw | |
|
标定转速 Rated speed |
2400r/min | |
|
排量 Exhaust |
4.6L | |
|
轮胎 Tyre |
前轮 Front wheel |
15.5-25(16PR) |
|
后轮 Rear wheel |
11.00-20(16PR) | |
注：由于技术改进，该数据可能与产品不符，如有误则以产品为准。
Note:The content and performance will be revised and the products will be improve without notice.
[ 更多产品图片：http://xmjfjx.photo.163.com ]
