SCZ30-4D伸缩臂吊装机 SCZ30-4D
品牌：厦门嘉丰(JF)
产品详情
产品参数
产品图片
SCZ30-4D伸缩臂吊装机
（Telescopic Crane Loader）
[ 产品简介 Product Introduction ]
SCZ30-4D型伸缩臂吊装机，底盘采用四轮驱动，刚性悬挂；液力机械传动，液压动力转向和液压制动，后轮转向。作业装置为两节四边形伸缩式工作臂和吊臂，专用于进集装箱石板材的吊装作业。
该车根据用户需求，在SCZ35-4型基础上，对工作臂、油缸及前后驱动桥、车架等均进行加强型设计，使用性能可靠。产品投放市场后，用户反映良好。
The Telescopic Crane Loader (SCZ30-4D) for almost any task that involves lifting, moving or placing objects or materials. It works with Four-Wheel Drive, hydromechanical transmission, hydraulic Power Steering, Hydraulic brake, and Rear-Wheel Steering. The handling equipment are Telescopic boom and Craner, it is expert to handle the stone-slab in container.
As the customers’request, we upgrade the design of SCZ35-4 with the working boom, cylinder and the shaft of drive etc. The quality is stable. It takes good reflection from the customers after marketing.
[ 主要技术参数 Specifications ]
|
额定起重量 Rated Load |
3000kg | |
|
载荷中心距（轮胎前沿距载荷中心） The Distance of Load Center(Tyre-fore to load center) |
3000mm | |
|
主钩最大起升高度（主吊钩距地面） Max.Lifting Height of Main Hook(Main hook to ground) |
6350mm | |
|
主钩最大外伸距（水平）（轮胎前沿距主吊钩） Max.Outspread of Main Hook(Horizontal)(Tyre-fore to main hook) |
2570mm | |
|
最大行驶速度 Max.Traveling Speed |
30km/h | |
|
最小离地间隙 Min.Ground Clearance |
350mm | |
|
最小转弯半径 Min.turning Radius |
7250mm | |
|
爬坡度 Grade Ability |
≥30% | |
|
倾翻角度上/下 The Angle of Lean Up/Down |
15°/25° | |
|
轮距 Tread |
1900mm | |
|
轴距 Wheel base |
2520mm | |
|
自重 Deadweight |
8960kg | |
|
整机外形尺寸（长×宽×高）（不计属具高度） Overall Dimension (L×W×H)(Except the tool’s) |
5400mm×2280mm×2700mm | |
|
发动机（东风康明斯） Engine (Dongfeng Cummins) |
型号 Type |
4BT3.9-C80 |
|
额定功率 Rated power |
60kw | |
|
标定转速 Rated speed |
2000r/min | |
|
排量 Exhaust |
3.9L | |
|
轮胎 Tyre |
前轮 Front wheel |
16/70-24(14PR) |
|
后轮 Rear wheel |
10.00-20(14PR) | |
注：由于技术改进，该数据可能与产品不符，如有误则以产品为准。
Note:The content and performance will be revised and the products will be improve without notice.
[ 更多产品图片：http://xmjfjx.photo.163.com ]
