美国BLT Mobicon Container Handler
产品详情
产品参数
产品图片
| Manufacturer | Mobicon Systems (Pty) Ltd |
| Internal Width | 9.84 ft |
| External width | 15.25 ft |
| Height: lowered | 11.80 ft |
| Height: raised | 17.39 ft |
| Length without container | 23.62 ft |
| Tare Weight | 28,660 lbs |
| Power Unit | Deutz, oil-cooled 60 HP diesel |
| Drive | Bosch-Rexroth, Hydrostatic, 4 wheel drive |
| Pumps and Valves | Bosch-Rexroth |
| Hydraulic Cylinders | Nordon |
| Electrical System | 24 Volt duel, heavy duty batteries |
| Alternator | 60 amp, heavy duty |
| Steering | 4 wheel hydraulic steering with automatic alignment |
| Tires | 8 only, resilient tires (solid) |
| Cabin | Semi open construction, with laminated front window and sidelights |
| Window | Internal, drop down, slide window fixture |
| Washers | Front, windscreen washers supplied |
| Safety Equipment | 3 x camera, closed circuit TV system, with in cab monitor One driving light, and four corner mounted working lights Rear mounted rotating beacon and dual audible movement alarms Dash mounted, safety positioning indicators, for drawbar and pins Operator cab, safety restraint bar, with electric drive cut out |
| Brakes | Hydrostatic with fail-safe emergency braking |
| Performance Data | |
| Capacity | 73,000 lbs SWL |
| Container types | Any ISO Container, 16ft to 52ft, over-heights, flatbeds |
| Drive Speed | 6.8 mph |
| Gradeability | 10% may vary based upon ground conditions |
| Lift Height | 5.9 feet |
| Lift Speed | 6.56 ft/min |
| Turning Diameter | 20ft container, 72 feet 40ft container, 124 feet |
| Cycle Time | Load container from the ground and onto a vehicle – 5 minutes |
| Ground Pressures | The front Mobicon tower has a tare weight of 15,432 lbs, while the rear tower weights just 11,023 lbs. The Mobicon is supported by 8 axles, with a boggie set located on each of the four corners of the machine. Each boggie set has a load sharing feature, to evenly distribute the weight of the Mobicon to the wheels. |
| *The manufacturer reserves the right to make changes in technical specifications as a result of product development | |
