龙工CBD10A-II托盘车 CBD10A-II
产品详情
产品参数
产品图片
•手动起升，电动行过走；
•交流电机，免维护；
•密封免维护电瓶，清洁环保；
•双速控制，控制简洁。
| 特征 | 1.2 | 型号 | Manufacturer's type designation | CBD10A-II | |||
| 1.5 | 额定载荷 | Load capacity/rated load | Q(kg) | 1000 | |||
| 1.6 | 载荷中心距 | Load centre distance | c(mm) | 500 | |||
| 1.9 | 轮距 | Wheelbase | Y(mm) | 1280/1350 | |||
| 重量 | 2.1 | 自重 | Service weight | kg | 143-156 | ||
| 车轮 | 3.2 | 轮子尺寸，前轮 | Tyre size,front | Φ175 | |||
| 3.3 | 轮子尺寸，后轮 | Tyre size rear | Φ80/74 | ||||
| 尺寸 | 4.4 | 起升高度 | Lift | h3(mm) | 115 | ||
| 4.9 | 操作手柄在驱动位置的最小/最大高度 | Height of tiller in drive position min./max. | h14(mm) | 1244 | |||
| 4.15 | 货叉降低时高度 | Height,lowered | h13(mm) | 85/75 | |||
| 4.19 | 总体长度 | Overall length | l1(mm) | 1685/1755 | |||
| 4.20 | 车体长度 | Length to face of forks | l2(mm) | 535 | |||
| 4.22 | 货叉尺寸 | Fork dimensions | Slell(mm) | 45/160/1150(1220) | |||
| 4.25 | 货叉外宽 | Distance between fork-arms | b5(mm) | 520/550/680 | |||
| 4.32 | 轴距中心离地间隙 | Ground clearance,centre of wheelbase | m2(mm) | 30/20 | |||
| 4.33 | 通道宽度，托盘1000x1200(1200跨货叉放置) | Aisle width for pallets 1000x1200 crossways | Ast(mm) | 1885/1955 | |||
| 4.34 | 通道宽度，托盘800x1200(1200沿货叉放置) | Aisle width for pallets 800x1200 lengthways | Ast(mm) | 1935/1955 | |||
| 4.35 | 转弯半径 | Turning radius | Wa(mm) | 1490/1560 | |||
| 性能数据 | 5.1 | 行驶速度，满载/空载 | Travel speed,laden/unladen | Km/h | 2.8/3.2 | ||
| 5.8 | 最大爬坡能力，满载/空载 | Max.gradeability,laden/unladen | % | 5/15 | |||
| 电动机 | 6.1 | 驱动电机功率 | Drive motor rating S2 60 min | kW | 0.5 | ||
| 6.4 | 蓄电池电压/额定容量 | Battery voltage,nominal capacity K5 | V/Ah | 24/38 | |||
| 6.5 | 蓄电池重量 | Battery weight | Kg | 26 | |||
