广州天力: 小松轮式装载机
品牌：广州天力
产品详情
产品参数
产品图片
| Model | Manufacturer's Designation | SG07L-3 | SD07L-3 | ||
| bucket capacity m*m*m(cu·yd) | 0.4(0.52) | ||||
| payload | min.reach kg(lb) | 700(1,540) | |||
| max.reach kg(lb) | — | ||||
| Bucket type | Straight blade edge | ||||
| power type | diesel.gasoline,lpg | Gasoline | |||
| tyre type | solid.Pneumatic | Pneumatic | |||
| operator type | Sriver Standing,Sitting | Sitting | |||
| wheels(*=driven) | Number front/Rear | 2*/2 | |||
| max.dumping clearance | At 45°discharge angle mm(in) | 1850(68.9) | |||
| max.dumping reach | At 45°discharge angle mm(in) | 440(17.3) | |||
| max.reach | 1565(61.6) | ||||
| max.tilt-back angle | At ground degree | 61 | |||
| max.dumping angle | Fully raised degree | 49 | |||
| overall dimensions | Height,Overhead guard mm(in) | 1995(78.5) | |||
| Length mm(in) | 3130(123.2) | ||||
| Width mm(in) | 1070(42.1) | ||||
| Height,Fully raised mm(in) | 3160(124.4) | ||||
| Bucket width mm(in) | 1150(45.3) | ||||
| turning radius | outside mm(in) | 1925(75.8) | |||
| travel speeds | Forward | Loaded | 1st km/h(mph) | 8.5(5.3) | |
| 2nd km/h(mph) | 14.0(8.7) | ||||
| Unloaded | 1st km/h(mph) | 8.5(5.3) | |||
| 2nd km/h(mph) | 14.5(9.0) | ||||
| Reverse | Loaded | 1st km/h(mph) | 8.5(5.3) | ||
| 2nd km/h(mph) | 14.0(8.7) | ||||
| Unloaded | 1st km/h(mph) | 8.5(5.3) | |||
| 2nd km/h(mph) | 14.5(9.0) | ||||
| bucket,lifting time | Loaded sec | 3.8 | |||
| bucket,reach time | Loaded/Unloaded sec | — | |||
| bucket,dumping time | Unloaded sec | 0.8 | 0.8 | ||
| max.drawbar pull | N(lb) | 10980(2,470) | 9120(2,050) | ||
| max.gradeability | Loaded | 32.5 | 30.6 | ||
| service weight | kg(lb) | 2540(5,600) | 2590(5,710) | ||
| axle loading(arm horizontal) | Loaded Front/Rear kg(lb) | 2400/840(5,290/1850) | 2420/870(5,340/1,920) | ||
| Unloaded Front/Rear kg(lb) | 1190/1350(2620/2980) | 1210/1390(2,670/3,060) | |||
| tyre size | Front | 6.50-10-10PR(1) | 6.50-10-10PR(1) | ||
| Rear | 5.00-8-8PR(1) | 5.00-8-8PR(1) | |||
| wheelbase | Rear | 1375(54.1) | 1375(54.1) | ||
| tread | mm(in) | 890/895(35.0/35.2) | 890/895(35.0/35.2) | ||
| ground clearance | Front mm(in) | 120(4.7) | 120(4.7) | ||
| brakes | Service | Hydraulic | Hydraulic | ||
| Parking | Mechanical | Mechanical | |||
| steering | Type | Power Steering | Power Steering | ||
| battery | Voltage/Capacity at 20-hour rating V/Ah | 12/33 | 12/80 | ||
| internal combustion engine | Make/Model | TOYOTA 5K | ISUZU 4LB1 | ||
| Rated horsepower(SAE GROSS) KW(HP)@min-1 | 28.5(39)2650 | 24.5(33)2700 | |||
| Max.torque(SAE GROSS) N.m(lb.ft)@min-1 | 115(85)@1800 | 95(70)@1800 | |||
| No.of cylinders/Displacement cm3(cu.in) | 4/1486(91) | 4/1499(91) | |||
| Cylinder Bore×Stroke mm(in) | 80.5×73.0(3.2×2.9) | 77.4×79.7(3.0×3.1) | |||
| Fuel tank capacity ltr.(U.S.gal) | 28(7.4) | 28(7.4) | |||
| clutch | Type | Dry.Single disk | Dry.Single disk | ||
| transmission | Type | Synchromesh | Synchromesh | ||
| hydraulic | Relief pressure for attachment bar(psi) | 172(2,490) | 172(2,490) | ||
| Tank capacity ltr.(U.S.gal) | 23(6.1) | 23(6.1) | |||
